Abstract:
Cotton stalks are a waste by-product of cotton farming and
a problem to dispose of as they tend to harbour parasites such as pink
boll worm. The stalks are normally disposed of by burning, which
contributes to the emission of harmful greenhouse gases which
pollute the environment. Cotton stalks were collected from Umguza
region in Zimbabwe which is located 53km from Bulawayo town.
The stalks were subjected to retting for 3 weeks and there after fibre
extraction carried out by means of manual decortication. The fibres
were then subjected to a number of tests such as tensile strength,
moisture regain, linear density, density and fibre length measurement
test. The fibres were characterised according to their position relative
to the cotton stalk and segmented as fibres from the top section,
middle section and bottom section. The test results from
characterisation of the fibres were analysed using SPSS statistical
software. The cotton stalk fibres have a light brownish colour and the
fibre length was approximately 8.18cm. The moisture regain of the
fibres was highest with fibres extracted from the root area having
regain of 11.14%, fibres from the top half had moisture regain of
10.68% and fibres from the bottom half of 10.20%. The diameter of
the cotton stalk fibres is 0.23mm which is similar to the diameter
found in sisal fibres. The fibres have an elongation of 1.5%. The fibre
yield from the cotton stalks is 23%. The cotton stalk fibres have
density of approximately 1.45g/cm3.These fibres have possibility in
various application which include fibreboards, for wall partitions,
furniture applications and ceiling boards to replace solid wood
materials.
