Please use this identifier to cite or link to this item:
http://ir.mu.ac.ke:8080/jspui/handle/123456789/9384
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Suliman, Zeinab A. | - |
dc.contributor.author | Mecha, Achisa C. | - |
dc.contributor.author | Mwasiagi, Josphat I. | - |
dc.date.accessioned | 2024-08-29T06:02:31Z | - |
dc.date.available | 2024-08-29T06:02:31Z | - |
dc.date.issued | 2023 | - |
dc.identifier.uri | http://ir.mu.ac.ke:8080/jspui/handle/123456789/9384 | - |
dc.description.abstract | Water pollution and scarcity of clean water are major issues of concern globally. In this study, titanium dioxide (TiO2) photocatalyst doped with ferric oxide (Fe2O3) was used to degrade reactive blue dye (171) using sunlight irradiation. Two approaches were employed to synthesize the photocatalyst: synthesis of ferric oxide and titanium precursor through ultrasonic-assisted sol-gel method and using iron (III) nitrate nonahydrate with commercial titanium dioxide. The photocatalysts were characterized using FTIR Spectroscopy, SEM, XRD analyses, and UVDRS to determine their chemical composition, morphology, crystallinity, and light absorption, respectively. The effect of contaminant concentration (1–3 ppm), solution pH and photocatalyst type on the degradation efficiency was studied. Doping enabled visible light absorption as confirmed by the UVDRS analysis. Solar photocatalytic degradation resulted in complete (100 % removal) of the dye within 2 h under solar irradiation for all concentrations of the dye studied. Furthermore, the photocatalysts exhibited superior performance in both neutral and acidic solutions compared to basic ones. After four cycles, the dye removal efficiency has decreased by less than 15 % for all the photocatalysts confirming the significant activity and high stability of the nanocomposite. The increased dye photodegradation efficacy of Fe2O3 doped TiO2 under sunlight irradiation is attributed to the narrowing of the photocatalyst's bandgap from 3.76 eV (in pure TiO2) to 2.83 eV. This narrowing of the bandgap enhances the absorption of visible light from sunlight, thus making this photocatalyst effective under sunlight and eliminating the use of electricity which is a requirement for ultraviolet photocatalysis. | en_US |
dc.language.iso | en | en_US |
dc.publisher | PMC | en_US |
dc.subject | Photocatalysis | en_US |
dc.subject | Reactive blue dye | en_US |
dc.subject | Ferric oxide | en_US |
dc.subject | Titanium dioxide | en_US |
dc.title | Effect of TiO2/Fe2O3 nanopowder synthesis method on visible light photocatalytic degradation of reactive blue dye | en_US |
dc.type | Article | en_US |
Appears in Collections: | School of Biological and Physical Sciences |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.